WHAT IS SOLDERING?

Plainly speaking, soldering is a process in which two, or even more items are joined together, simply by melting and inserting the filler metal (solder) into the joint. This process can be done in two ways, mechanically and electrically. Electronic soldering can connect electrical wires to the certain device, as well as electronic components to some printed circuit boards. Usually, these electronic connections may be hand soldered with a soldering iron. There are also some more complex automated methods of soldering, such as wave soldering, which is used in industrial production. In a modern day of electronics, soldering is a must have skill set for any professional computer/phone repair shop.

How does it work, step by step:

1.       Make sure that the surface that needs to be soldered is clean

2.       For soldering iron, the set temperature should be around 600/650 F

3.       Hold the tip against both the lead and contact point/cushion for a couple of moments. The thought is to bring both up to a patching temperature simultaneously

4.       Contact the patch wire to the lead and contact point/cushion a couple of times until weld streams around the lead and contact.

5.       Review the patch joint to ensure there is full inclusion over the contact region and the lead.

6.       In the event that fundamental, trim the lead with a shear lead shaper. Try not to manage into the weld joint, which can harm the association.

7.        

Red Fusion repair shop is fully equipped to perform the top notch soldering repairs. Whether you need the simple power pocket replacement or a complicated intervention on your computer motherboard, do not worry, we have you covered. It is an easy and generally inexpensive way to get your electronic device back on track, instead of purchasing a new one.